Frequently asked questions
Capacity, stacking, locks and shipping. If your question is not here, the sales team answers directly.
What is the difference between a paraffin block cabinet and a slide cabinet?
A block cabinet holds embedded tissue blocks in rows sized for cassettes. A slide cabinet holds glass slides upright in narrow slots. Both use the same 515 x 480 mm section, so they can stand side by side, but the drawer interiors are not interchangeable.
How many blocks fit in one cabinet?
A standard 515 mm drawer holds about 800 to 825 cassettes. A four-section, five-drawer set therefore holds about 16,000 to 16,500 blocks. The slim 450 mm cabinet holds about 600 per drawer, or 12,000 per set.
How many slides fit in a slide cabinet?
A nine-drawer bay holds about 13,750 slides, and four bays stacked give about 55,000. An eighteen-drawer bay doubles the density to about 27,500 per section.
Can cabinets be stacked?
Yes. Sections locate on corner pins and bolt together, up to four sections per column. Stacks over 1.5 m should be restrained to the wall, and only one drawer per column should be open at a time.
Do you supply locks?
Yes. Drawer locks and full-height lockable doors are available on most models. The eighteen-drawer archive cabinet has drawer locks as standard. Sections can be keyed alike or keyed differently.
What steel thickness do you use?
Static cabinets use a 0.8 mm cold-rolled steel body. The compact range uses a 1.2 mm body with 1.5 mm columns and a seamless welded frame.
Can you manufacture a custom size?
Drawer configurations, section counts and finishes can be adapted within the existing tooling. Fully custom dimensions usually require a minimum order quantity. Send a drawing and we will confirm what is possible.
What is the lead time?
Lead time depends on the model, the number of sections and the finishing specification, and is confirmed in the quotation. Single sections are usually available sooner than multi-column orders.
Do you ship internationally?
Yes. Cabinets ship as assembled sections or knocked down, wrapped and corner-protected, palletised for sea freight. A packing list with section numbers is supplied so the order can be assembled against the room plan.
Can you provide drawings for architects?
Yes. We can supply plan and elevation drawings with section dimensions, drawer projection and recommended aisle widths for space planning.
How do I get a quotation?
Send annual block or slide counts, the retention period and a room plan to younuosh@foxmail.com, or use the form on the contact page. We usually reply within two working days.
Still deciding?
The two guides that answer most specification questions are how to choose a paraffin block storage cabinet and slide cabinet capacity maths. Both work through real numbers rather than general advice.