Factory-direct pathology storage · Luoyang, Henan, China

Export enquiries: younuosh@foxmail.com +86 139 3881 2326
High-density slide archive · GT-PA18

18-Drawer Pathology Slide Archive Cabinet

Two columns of nine drawers double the slide capacity per section, for archives where floor space is scarce.

27,500 slides 18 drawers 0.8 mm steel 4-section stacking
18-Drawer Pathology Slide Archive Cabinet
18-Drawer Pathology Slide Archive Cabinet · GT-PA18 · 27,500 slides

This cabinet doubles slide density by splitting the section into two columns of nine drawers. Capacity per section rises to about 27,500 slides while the footprint stays at 515 x 480 mm, which makes it the usual choice for archive rooms that are already full.

The trade-off is retrieval height and drawer count: eighteen drawers means more labels to scan, so a clear numbering scheme on the drawer fronts matters more than on a nine-drawer bay. Lockable drawers are standard on this model, and sections stack four high for a 110,000-slide wall.

Specifications

18-Drawer Pathology Slide Archive Cabinet · GT-PA18
Configuration4 stackable sections, 18 drawers per section (2 x 9)
Section sizeH 360 x W 515 x D 480 mm
Nominal capacityAbout 27,500 slides per section; 110,000 per 4-section set
Cabinet steel0.8 mm cold-rolled steel
Surface treatment9-stage pretreatment, electrostatic powder coating
Drawer runnersTelescopic slides with anti-tip stop
LockingDrawer locks standard
BaseOptional 80 mm stainless steel plinth

Capacity figures are nominal at standard cassette or slide dimensions. Thicker cassettes, thick coverslips and divider strips reduce the real number by roughly 5 to 10 percent.

Design details

Two-column layout

Eighteen shallow drawers per section double capacity without widening the cabinet.

Lockable as standard

Each drawer has a lock, so access can be limited to archive staff without a separate door.

Shallow drawer travel

Shorter drawers project less into the aisle than a full-width drawer, which helps in tight archive rooms.

Numbering-friendly fronts

Flat drawer fronts take printed or engraved labels for accession ranges.

Stacks to four sections

Up to 110,000 slides on one footprint, restrained to the wall.

Typical installations

  • Long-term slide archives in hospital pathology
  • Rooms where floor area cannot be expanded
  • Departments consolidating slides from satellite stores
  • Medico-legal collections needing drawer-level locks

Questions about this model

How does 18 drawers fit in the same footprint as 9?

The section is split into two columns of nine narrower drawers. Slides are still stored upright and full length, but each drawer holds about half the slides of a full-width drawer.

Is 110,000 slides per set accurate?

It is the nominal figure at standard slide dimensions: 27,500 per section times four. Thicker mounts reduce it.

Can I lock the whole section instead of each drawer?

Yes, a lockable door front is available if you prefer one key per section.

Need a cabinet sized to your archive?

Send your block or slide counts, retention period and room plan. We will return a capacity calculation and a quotation within two working days.