20-Drawer FFPE Block Storage Cabinet
A narrower 450 mm cabinet with twenty drawers and about 12,000 blocks, for corridors and tight archive rooms.

Where floor space is the constraint, this cabinet trades width for height. At 450 mm wide and 1,600 mm high it fits a corridor or a narrow archive aisle that will not take a 515 mm cabinet, while still holding about 12,000 blocks across twenty drawers.
Each of the four sections carries five drawers at roughly 600 blocks per drawer. The shallower drawer suits blocks filed in a single row per accession, which some departments prefer because a whole case is visible at once. The cabinet uses the same steel and coating process as the wider models, so it can stand beside them without looking out of place.
Specifications
| Configuration | 4 sections, 5 drawers per section (20 drawers) |
|---|---|
| Overall size | H 1,600 x W 450 x D 480 mm |
| Nominal capacity | About 600 blocks per drawer; 12,000 per set |
| Cabinet steel | 0.8 mm cold-rolled steel |
| Surface treatment | 9-stage pretreatment, electrostatic powder coating |
| Drawer runners | Auto-return telescopic slides |
| Base | Optional stainless steel plinth |
| Locking | Optional drawer locks |
Capacity figures are nominal at standard cassette or slide dimensions. Thicker cassettes, thick coverslips and divider strips reduce the real number by roughly 5 to 10 percent.
Design details
450 mm width
Fits narrow archive rooms and corridors where a 515 mm cabinet would block the aisle.
Single-row drawer
About 600 blocks per drawer keeps a case series visible in one row, which speeds up verification.
1,600 mm working height
Top drawer stays within reach for most staff without a step stool.
Full steel specification
Same 0.8 mm cold-rolled body and nine-stage pretreatment as the wider range.
Typical installations
- Narrow archive rooms and corridor storage
- Departments filing one case per drawer row
- Satellite archives on wards or in annex buildings
- Rooms where cabinet width is limited by door swings
Questions about this model
Why does it hold fewer blocks than the 515 mm cabinet?
The narrower drawer holds about 600 blocks instead of 800 to 825, so total capacity is lower even though drawer count is the same.
Is 1,600 mm too tall for staff to reach?
The top drawer sits at about 1,560 mm, which is reachable for most adults. If the room is used by shorter staff, specify three sections instead of four.
Can it be stacked higher?
No. Four sections is the maximum for this footprint; add another cabinet alongside instead.