Factory-direct pathology storage · Luoyang, Henan, China

Export enquiries: younuosh@foxmail.com +86 139 3881 2326
Slide archive · GT-MS9

9-Drawer Microscope Slide Storage Cabinet

Nine drawers of upright glass slides, about 13,750 per section and 55,000 per four-section set.

13,750 slides 9 drawers 0.8 mm steel 4-section stacking
9-Drawer Microscope Slide Storage Cabinet
9-Drawer Microscope Slide Storage Cabinet · GT-MS9 · 13,750 slides

Nine drawers in a 3 x 3 layout is the workhorse of slide storage. Each drawer holds slides upright in numbered rows, so glass never lies flat on glass and a slide can be lifted by its frosted end without touching the section. One section holds about 13,750 slides; four stacked sections hold about 55,000.

Drawers run on auto-return telescopic slides with a high-strength roller at the start of travel and a damping pad at the end. That combination stops the drawer before its centre of gravity passes the cabinet front, which is the usual cause of a tipped drawer and a floor full of broken glass.

Specifications

9-Drawer Microscope Slide Storage Cabinet · GT-MS9
Configuration4 stackable sections, 9 drawers per section (3 x 3)
Section sizeH 360 x W 515 x D 480 mm
Nominal capacityAbout 13,750 slides per section; 55,000 per 4-section set
Cabinet steel0.8 mm cold-rolled steel
Surface treatment9-stage pretreatment, electrostatic powder coating
Drawer runnersTelescopic slides, auto-return, anti-tip stop
Drawer interiorUpright slide rows with numbered divider positions
BaseOptional 80 mm stainless steel plinth
LockingOptional drawer locks
WeightAbout 23 kg per empty section, 92 kg per set

Capacity figures are nominal at standard cassette or slide dimensions. Thicker cassettes, thick coverslips and divider strips reduce the real number by roughly 5 to 10 percent.

Design details

Upright slide rows

Slides stand on edge in numbered rows, separated by dividers so labels stay readable and glass does not rub.

Anti-tip drawer travel

A high-strength roller at the start of travel and a stop before the balance point keep a loaded drawer from tipping out.

Damping pad

A high-elasticity pad absorbs the closing impact, which reduces noise and stops slides jumping out of their slots.

Numbered divider positions

Divider slots are spaced for standard 25 x 75 mm slides and can be labelled to match your accession blocks.

Four-section stacking

Corner pins and bolts join sections; 55,000 slides fit in roughly half a square metre of floor.

Optional locks

Drawer locks for departments that need controlled access to reported cases.

Typical installations

  • Pathology departments archiving reported cases
  • Histology laboratories filing stained slides by accession
  • Teaching hospitals maintaining reference collections
  • Reference laboratories with high slide throughput

Questions about this model

How many slides fit in one drawer?

About 1,528 slides per drawer at standard 25 x 75 mm slide dimensions, giving roughly 13,750 per nine-drawer section.

Will it take slides with thick coverslips or frosted labels?

Yes, but capacity drops. Thicker mounts and large frosted ends reduce the number of slides per row; allow 5 to 10 percent headroom.

Is the cabinet stable when all drawers are open?

Open one drawer at a time. The anti-tip stop prevents a single drawer from tipping, but the cabinet should still be restrained to the wall when stacked four high.

Need a cabinet sized to your archive?

Send your block or slide counts, retention period and room plan. We will return a capacity calculation and a quotation within two working days.