Factory-direct pathology storage · Luoyang, Henan, China

Export enquiries: younuosh@foxmail.com +86 139 3881 2326
Working slide storage · GT-HS6

6-Drawer Compact Histology Slide Cabinet

A lower six-drawer bay that fits under a bench or beside the microscope, holding about 9,000 slides.

9,000 slides 6 drawers 0.8 mm steel 4-section stacking
6-Drawer Compact Histology Slide Cabinet
6-Drawer Compact Histology Slide Cabinet · GT-HS6 · 9,000 slides

Not every slide cabinet needs to be an archive. This six-drawer bay is sized for the reporting room, where a pathologist needs the current week's slides within reach rather than a decade of cases. At 360 mm per section it can sit under a bench or be stacked two high as a side unit.

Capacity is about 9,000 slides per section, roughly two-thirds of a nine-drawer bay. Drawers use the same upright rows and dividers as the archive cabinets, so slides can be transferred to a nine-drawer store later without changing trays or numbering.

Specifications

6-Drawer Compact Histology Slide Cabinet · GT-HS6
ConfigurationStackable sections, 6 drawers per section
Section sizeH 360 x W 515 x D 480 mm
Nominal capacityAbout 9,000 slides per section
Cabinet steel0.8 mm cold-rolled steel
Surface treatment9-stage pretreatment, electrostatic powder coating
Drawer runnersAuto-return telescopic slides
BaseOptional plinth or castors for bench-side use
LockingOptional drawer locks

Capacity figures are nominal at standard cassette or slide dimensions. Thicker cassettes, thick coverslips and divider strips reduce the real number by roughly 5 to 10 percent.

Design details

Bench-height option

One or two sections keep the top drawer below eye level, so slides can be filed while seated.

Same drawer geometry

Interchangeable with nine-drawer bays, so working stock can move into the archive without re-filing.

Compact footprint

515 x 480 mm fits beside a microscope bench or at the end of a reporting desk.

Quiet close

Damping pads keep the drawer from slamming in a shared reporting room.

Typical installations

  • Reporting rooms holding the current case load
  • Microscope benches with adjacent slide storage
  • Small laboratories with limited wall space
  • Satellite stores on wards or in consulting rooms

Questions about this model

Can it go under a standard bench?

A single section is 360 mm high plus the base, so it fits under most 850 mm benches. Measure the knee space first.

Can I add sections later?

Yes, sections stack. Two sections give a side-unit height of about 720 mm.

Does it take the same dividers as the nine-drawer cabinet?

Yes, the drawer width is identical, so dividers and slide rows are interchangeable.

Need a cabinet sized to your archive?

Send your block or slide counts, retention period and room plan. We will return a capacity calculation and a quotation within two working days.