Factory-direct pathology storage · Luoyang, Henan, China

Export enquiries: younuosh@foxmail.com +86 139 3881 2326
Slide drying · GT-SD96

Histology Slide Drying Cabinet

Ninety-six removable boards, twenty slides each: 1,920 slides drying flat and dust-free.

1,920 slides 96 boards 0.8 mm steel 4-section stacking
Histology Slide Drying Cabinet
Histology Slide Drying Cabinet · GT-SD96 · 1,920 slides

Slides need to lie flat and separated while the coverslip medium sets. Stack them too early and coverslips shift; leave them on an open bench and dust settles on the glass. This drying cabinet gives each batch its own board, and the boards slide into a steel frame that keeps dust off the drying surfaces.

The frame has four sections of 24 boards. Each ABS board holds 20 slides, so one cabinet dries 1,920 slides at a time in a footprint of 480 x 310 mm. Boards are removable, which means a batch can be carried from the coverslipper to the cabinet and back without touching individual slides.

Specifications

Histology Slide Drying Cabinet · GT-SD96
Configuration4 sections, 24 board levels per section
Overall sizeH 1,160 x W 480 x D 310 mm
Section sizeH 270 x W 450 x D 310 mm
Boards96 removable ABS drying boards
Board capacity20 standard slides per board
Total capacity1,920 slides
Frame steel0.8 mm cold-rolled steel, powder coated
BaseOptional stainless steel plinth

Capacity figures are nominal at standard cassette or slide dimensions. Thicker cassettes, thick coverslips and divider strips reduce the real number by roughly 5 to 10 percent.

Design details

Removable boards

Each board carries 20 slides, so a staining batch moves as one unit instead of slide by slide.

Open-front airflow

No closed door means air moves freely around the boards and solvent vapour does not pool inside the cabinet.

ABS board material

ABS resists alcohol and xylene residues and will not scratch slide labels the way bare metal does.

Dust shielding

The steel frame and shelf geometry keep airborne dust off the drying surfaces in a shared laboratory.

Small footprint

480 x 310 mm fits at the end of a staining line or beside a coverslipper.

Typical installations

  • Drying slides after coverslipping
  • Batch transfer between staining and filing
  • Frozen section and rapid H&E workflows
  • Any bench where slides must dry flat and dust-free

Questions about this model

Is the cabinet heated?

No. It is a passive drying rack: ambient air moves around the boards. Forced heating is not recommended because it can trap solvent under the coverslip.

Can I buy extra boards?

Yes, boards are supplied separately so you can keep a batch in transit while another dries.

Where should it be placed?

Away from sinks and open stain containers. Solvent vapour near a drying slide can redeposit and cloud the coverslip.

Need a cabinet sized to your archive?

Send your block or slide counts, retention period and room plan. We will return a capacity calculation and a quotation within two working days.