Factory-direct pathology storage · Luoyang, Henan, China

Export enquiries: younuosh@foxmail.com +86 139 3881 2326
Paraffin block storage · GT-PB5

5-Drawer Paraffin Block Storage Cabinet

The standard archive cabinet: four stackable sections, five drawers each, about 16,500 cassettes per set.

16,500 blocks 5 per section 0.8 mm steel 4-section stacking
5-Drawer Paraffin Block Storage Cabinet
5-Drawer Paraffin Block Storage Cabinet · GT-PB5 · 16,500 blocks

This is the cabinet most histology laboratories start with. Four sections stack into a single column 1,520 mm high, each section carries five drawers, and each drawer holds roughly 800 to 825 standard cassettes. A complete set therefore stores about 16,000 to 16,500 paraffin blocks in a footprint of 515 x 480 mm.

The cabinet is built from 0.8 mm cold-rolled steel that is laser-cut and CNC-formed, then cleaned through a nine-stage pretreatment before electrostatic powder coating. Drawers run on auto-return telescopic slides with a damping pad, so they close quietly and sit flush when not in use. Sections can be bought singly and stacked later, which lets a department add capacity without replacing what it already owns.

Specifications

5-Drawer Paraffin Block Storage Cabinet · GT-PB5
Configuration4 stackable sections, 5 drawers per section
Overall sizeH 1,520 x W 515 x D 480 mm
Section sizeH 360 x W 515 x D 480 mm
Nominal capacity16,000-16,500 standard cassettes per set
Cabinet steel0.8 mm cold-rolled steel
Surface treatment9-stage pretreatment, electrostatic powder coating
Drawer runnersAuto-return telescopic slides with damping pad
BaseOptional 80 mm stainless steel plinth
StackingInterlocking pins at all four corners
LockingOptional drawer locks or lockable door front
ColourStandard light grey; other colours on request

Capacity figures are nominal at standard cassette or slide dimensions. Thicker cassettes, thick coverslips and divider strips reduce the real number by roughly 5 to 10 percent.

Design details

Drawer geometry for standard cassettes

Each drawer is divided into rows sized for standard tissue cassettes, keeping blocks upright and in sequence so a single block can be lifted without disturbing the row.

Nine-stage steel pretreatment

Degreasing, pickling, rinsing and passivation before coating. The sequence is what stops rust creeping out of cut edges in humid archive rooms.

Electrostatic powder coating

Epoxy powder cured at high temperature gives a smooth, hard film that resists cleaning agents, alcohol spills and repeated wiping.

Auto-return runners

Telescopic slides with a damping pad pull out fully, then close themselves flush. No drawer left half-open to catch a passing trolley.

Modular stacking

Sections locate on corner pins and bolt together, so a two-section cabinet can grow into a four-section wall unit without a new purchase.

Optional stainless plinth

An 80 mm stainless base lifts the cabinet off the floor for mop cleaning and protects the bottom panel from standing water.

Typical installations

  • Hospital pathology departments filing reported cases
  • Histology laboratories storing embedded blocks before cutting
  • Reference and private laboratories with growing archives
  • Biobanks holding FFPE blocks in ambient conditions

Questions about this model

How many cassettes does one drawer hold?

About 800 to 825 standard cassettes, depending on cassette wall thickness and how tightly the rows are packed. The 16,000-16,500 figure for a four-section set is based on that drawer load.

Can I buy a single section instead of the full set?

Yes. Sections are supplied individually and stack with interlocking pins, so you can start with one or two and add more later.

Is a lock available?

Yes. Drawer locks or a lockable door front can be specified for departments that need access control on archived blocks.

Does the cabinet need to be fixed to the wall?

A four-section stack should be restrained. We supply corner pins for stacking and recommend an anti-tip bracket where the cabinet is taller than 1.5 m.

Need a cabinet sized to your archive?

Send your block or slide counts, retention period and room plan. We will return a capacity calculation and a quotation within two working days.