Factory-direct pathology storage · Luoyang, Henan, China

Export enquiries: younuosh@foxmail.com +86 139 3881 2326
Filing systems · 6 min read

Cross-Referencing Blocks and Slides: Numbering That Works

The best numbering system is the one a tired technician can use correctly at 5 pm. That rules out most clever ones.

A block and its slides share one accession number. If the number is filed in the same position in both cabinets, a case can be pulled in two movements. If it is not, every retrieval becomes a search.

Four properties of a workable number

  • Unique across the whole retention period, not just the current year.
  • Sortable the same way on a shelf and in the laboratory information system.
  • Writable by hand on a cassette without abbreviation.
  • Short enough to fit a drawer label and a slide label at the same size.

Most failures come from the third and fourth: a number that needs a hyphen, a slash and a two-letter code will be abbreviated differently by different people.

Choosing a format

Year-prefixed sequential numbers (24-10572) are the most common because they sort naturally and reset the sequence annually. Laboratory-prefixed numbers (H24-10572) help when several sites share an archive. Date-based numbers (240517-003) encode more information but are longer and easier to misread.

Pick one and write it into the laboratory procedure. Two formats running in parallel is the single most common archive defect we see.

Same order in both cabinets

If block 24-10572 sits in the third drawer of the block cabinet, slide 24-10572 should sit in the third drawer of the slide cabinet. That requires matched drawer geometry: a 515 mm drawer in both systems makes the mapping trivial.

It also requires matched capacity planning. If the block drawer holds 800 cases and the slide drawer holds 1,528 slides, the sequences drift apart unless you assign ranges deliberately.

Drawer labels

Label every drawer with the range it holds, printed large enough to read from a metre away. Use the same range text on the block and slide cabinets so a mismatch is obvious.

A tissue block filing cabinet with flat drawer fronts takes a printed label well; a recessed front collects dust and peels at the corners.

Surviving a LIS migration

When the laboratory information system changes, the numbering may not. Keep the physical sequence and map the new system to it, rather than renumbering the archive. Renumbering means touching every cassette, every slide and every label, and it will introduce errors that surface years later.

If renumbering is unavoidable, do it year by year, and keep a crosswalk table permanently.

Numbering checklist

  • One format, documented in the procedure manual
  • Same position in block and slide cabinets
  • Drawer ranges printed on both cabinets
  • Gaps left at range boundaries for growth
  • Crosswalk table retained after any system change

Common questions

Should slides be filed by stain instead of case?

No. Stains arrive in batches, but retrieval is always by case. A case spread across four stain-based drawers is effectively unfiled.

What if a case has more slides than a drawer range allows?

Assign the case to its accession position and let the extra slides continue into the next drawer, with a note on the label. Consistency matters more than perfect alignment.


Need this applied to your own archive? Send annual block or slide counts and the retention period, and we will return a capacity calculation with a suggested cabinet layout. Request a quote.

Need a cabinet sized to your archive?

Send your block or slide counts, retention period and room plan. We will return a capacity calculation and a quotation within two working days.