Factory-direct pathology storage · Luoyang, Henan, China

Export enquiries: younuosh@foxmail.com +86 139 3881 2326
Planning · 7 min read

Planning Archive Capacity Around Retention Periods

Retention periods turn a storage purchase into a forecast. The arithmetic is simple; the mistake is using today's volume instead of the ten-year average.

Every archive is a queue: material enters at the case rate and leaves only when the retention period expires. The queue length is the product of the two, and it decides how much cabinet the department needs.

The basic calculation

Annual block volume, multiplied by retention years, multiplied by a growth factor. For a department cutting 250 blocks a day, five days a week, that is about 62,500 blocks a year. Over 15 years, 937,500 blocks; with 15 percent growth, just over a million.

At 16,500 blocks per four-section cabinet, that is 65 columns, or about 33 metres of wall at 515 mm per column. If the room has 20 metres, the archive is short before the first block is filed.

Blocks and slides grow differently

Slides per case vary by laboratory and by specimen type: a single biopsy may produce two slides, a resection twenty. That makes slide volume harder to forecast than block volume, and it is why slide storage usually drives the floor plan.

A department producing 62,500 blocks a year might produce 250,000 slides. At 55,000 slides per four-section stack, that is five stacks a year, or 75 stacks over 15 years.

Growth allowance

Fifteen percent is a reasonable allowance for case growth and for changes in practice, such as more levels per case or additional immunohistochemistry. It is not a substitute for a plan: if the room cannot take 15 percent more, decide now whether the answer is compact shelving, a second room or an off-site archive.

Retention is a local decision

Retention periods differ between countries and between institutions, and they can differ between public and private laboratories. Confirm the requirement with your own regulator and record it in the storage plan. Do not import a period from another jurisdiction because it appeared in a guideline.

Whatever the period, model the archive at the end of it, not at the start.

Worked example

ItemValue
Blocks per year62,500
Retention15 years
Growth allowance15%
Total block positions1,078,125
Four-section cabinets (16,500)66
Wall length at 515 mm34 m

Thirty-four metres is more wall than most rooms have, which is why a pathology slide archive cabinet wall is usually paired with compact shelving for the older years.

Staging the build

You do not have to buy fifteen years of cabinets on day one. Buy for the first three to five years, keep one empty column, and add sections as the archive fills. The important decision is the layout: leave wall space or track length for the expansion, because a room that fills wall to wall in year four cannot be extended.

Common questions

Should I plan for the maximum retention period?

Yes, if the material must be kept that long. Otherwise you are planning to run out of space on a known date.

What if our volume is falling?

Then plan to the trend, not to the peak. But keep the growth allowance for changes in case mix.


Need this applied to your own archive? Send annual block or slide counts and the retention period, and we will return a capacity calculation with a suggested cabinet layout. Request a quote.

Need a cabinet sized to your archive?

Send your block or slide counts, retention period and room plan. We will return a capacity calculation and a quotation within two working days.